ASTEC Re-Ply Roofing System 10-Year Renewable Warranty guarantees a durable, waterproof roof for ten years. You may then have ASTEC inspect, clean, restore, and warranty your Astec Re-Ply roof for another 10 years.
By relying on ASTEC this could be the last roof you will ever need!
What people are saying about ASTEC...
"Not only have the leaks
stopped, but the level of comfort has increased in these near 100
degree days."
- R.B. C., Madison Air Parts & Supply
Click for more
Roofing Testimonials
Restore & Improve Single-Ply Roofs
• Creates a seamless, weathertight barrier.
• Stays pliable and weather tight in all climates.
• Withstands ponding water.
• Reflects heat and harmful U/V radiation.
• Surpasses R19 heat gain testing.
• Resists fungi and algae growth
• Saves big temperature control and cooling costs.
• Greatly reduces wind damage risk.
• Improves appearance.
• Eliminates roof replacement expenses.
• Provides a 10-Year Renewable Warranty.
Prepare Surface:
Pressure wash the old roof surface to eliminate loose material, repair substrate, blisters, and cracks as needed. Clean all rubber surfaces with EPDM rinseable primer.
Pressure wash the old roof surface to eliminate loose material, repair substrate, blisters, and cracks as needed. Clean all rubber surfaces with EPDM rinseable primer.
Seal Seams:
Reinforce all roof, vent, duct, and flashing seams and laps with high tensile strength fabric or BBT Butyl-back tape. Saturate with ASTEC Base Sealer #2000.
Reinforce all roof, vent, duct, and flashing seams and laps with high tensile strength fabric or BBT Butyl-back tape. Saturate with ASTEC Base Sealer #2000.
Prime and Seal Surface:
Flow on one or two layers of ASTEC Base sealer #2000 for Rubber. This bonding sealer applies as a fluid, filling all cracks, and curing as a seamless, pliable membrane over the entire roof.
Flow on one or two layers of ASTEC Base sealer #2000 for Rubber. This bonding sealer applies as a fluid, filling all cracks, and curing as a seamless, pliable membrane over the entire roof.
Apply Core Layer:
Flow on the first layer of ASTEC Re-Ply #2000 Finish Layer. It will bond with the ASTEC Re-Ply Base Sealer #2000 and provide a monolithic core base for the final surface.
Flow on the first layer of ASTEC Re-Ply #2000 Finish Layer. It will bond with the ASTEC Re-Ply Base Sealer #2000 and provide a monolithic core base for the final surface.
Apply Surface Layer:
Flow on the final ASTEC Re-Ply # 2000 Finish layer. The new surface will be a seamless, titanium white ply of a highly reflective roofing that is waterproof, pliable, and virtually impervious to airborne corrosives over years of hostile environmental conditions.
Flow on the final ASTEC Re-Ply # 2000 Finish layer. The new surface will be a seamless, titanium white ply of a highly reflective roofing that is waterproof, pliable, and virtually impervious to airborne corrosives over years of hostile environmental conditions.
Click here for a
Free
Roof Survey & Proposal
Click here for
single-ply roofapplication specifications
ASTEC BBT Butyl-Back Tape is highly adhesive and bonds especially well with ASTEC Re-Ply finish layers. Once Embedded, ASTEC BBT Tape's high tensile strength contributes to the stability of all restored areas. 
ASTEC EPDM Rinseable Primer is the breakthrough product that made renewal of EPDM rubber roofs truly possible. We are now able to completely clear away the chalky surface residue on EPDM roofs caused by ozone deterioration. The seams and surface are clean and primed for bonding, assuring permanent melding and sealing of all subsequent ASTEC Re-Ply layers. 
ASTEC Base Sealer # 2000 is used to saturate and waterproof all seam sealing fabrics and tapes at joints, vents, and rubber roof repairs. Once cured a second layer of ASTEC Base Sealer # 2000 is applied over the entire roof area to create the first monolithic bonding surface that is both waterproof and wind tight. Base Sealer #2000 is formulated to bond the original EPDM rubber to the ASTEC Re-Ply Finish Layers.
ASTEC #2000 Finish works with ASTEC Re-Ply Base Sealer #2000. The first finish layer bonds with the base sealer and melds into the old EPDM roofing material forming a new, seamless, weather tight roofing surface. Once the second layer of Re-Ply #2000 Finish cures, the new roof takes on the sustainable ASTEC advantages that permit the ICC water tight renewable warranty to be updated every ten years.