ASTEC Re-Ply Roofing System 10-Year Renewable Warranty guarantees a durable, waterproof roof for ten years. You may then have ASTEC inspect, clean, restore, and warranty your Astec Re-Ply roof for another 10 years.
By relying on ASTEC every 10 years, this could be the last roof you will ever need!
What people are saying about ASTEC...
“Your product will reduce expansion and contraction of roofs, adding
life to the roofs. I highly recommend this product”
-Jim K., Maintenance Supervisor, Wausau
Metals
Click for more
Roofing Testimonials
Restore & Improve Asphalt Roofs
• Creates a seamless, weathertight barrier.
• Stays pliable and weather tight in all climates.
• Withstands ponding water.
• Resists fungi and algae growth
• Reflects heat and harmful U/V radiation.
• Surpasses R19 heat gain testing.
• Saves big temperature control and cooling costs.
• Greatly reduces wind damage risk.
• Improves appearance.
• Eliminates roof replacement expenses.
• Provides a 10-Year Renewable Warranty.
• Creates a seamless, weathertight barrier.
• Stays pliable and weather tight in all climates.
• Withstands ponding water.
• Resists fungi and algae growth
• Reflects heat and harmful U/V radiation.
• Surpasses R19 heat gain testing.
• Saves big temperature control and cooling costs.
• Greatly reduces wind damage risk.
• Improves appearance.
• Eliminates roof replacement expenses.
• Provides a 10-Year Renewable Warranty.
Prepare Surface:
Pressure wash the old roof surface to eliminate loose material, repair substrate, blisters, and cracks as needed.
Pressure wash the old roof surface to eliminate loose material, repair substrate, blisters, and cracks as needed.
Seal Seams:
Reinforce all roof, vent, duct, and flashing seams and laps with high tensile strength polyester cloth and tape. Saturate with with the appropriate ASTEC Base Sealer
Reinforce all roof, vent, duct, and flashing seams and laps with high tensile strength polyester cloth and tape. Saturate with with the appropriate ASTEC Base Sealer
Prime and Seal Surface:
Flow on one or two layers of the appropriate ASTEC Base Sealer. This bonding sealer applies as a fluid, filling all cracks, and curing as a seamless, pliable membrane over the entire roof.
Flow on one or two layers of the appropriate ASTEC Base Sealer. This bonding sealer applies as a fluid, filling all cracks, and curing as a seamless, pliable membrane over the entire roof.
Apply Core Layer:
Flow on the first layer of the appropriate ASTEC Re-Ply Finish. It will bond with the ASTEC Base Sealer and provide a monolithic core base for the final roof surface.
Flow on the first layer of the appropriate ASTEC Re-Ply Finish. It will bond with the ASTEC Base Sealer and provide a monolithic core base for the final roof surface.
Apply Surface Layer:
Flow on the final ASTEC Re-Ply Finish layer. The new roof surface will be a seamless, titanium white ply of a highly reflective roofing that is waterproof, pliable, and virtually impervious to airborne corrosives over years of hostile environmental conditions.
Flow on the final ASTEC Re-Ply Finish layer. The new roof surface will be a seamless, titanium white ply of a highly reflective roofing that is waterproof, pliable, and virtually impervious to airborne corrosives over years of hostile environmental conditions.
ASTEC Reinforcing Poly Cloth is a high tensile strength polyester fabric used over joints, seams, and repairs in failing roof substrates. Once embedded in ASTEC Re-Ply System roofing membranes, ASTEC Reinforcing Poly cloth helps stabilize the restored roof into a single, seamless surface that is virtually impervious to tears, splits or damage from the elements. 
ASTEC Base Sealer # 4 is used to saturate and waterproof all seam sealing fabrics and tapes at joints, vents, and asphalt roof repairs. Once cured, a second layer of ASTEC Base Sealer #4 is applied over the entire roof area to create the first monolithic bonding surface that is both waterproof and wind tight. Base Sealer #4 is formulated to bond the original asphalt substrate to the subsequent ASTEC Re-Ply Finish layers. 
ASTEC Base Sealer #2000 is used as an additional option whenever a flat roof with ponding water is a regular problem.
ASTEC Ceramic Finish #900 is often the preferred choice as the top surface membrane if the old asphalt base is sloped. It will be applied in multiple Layers over Re-Ply Poly Cloth and Base Sealer to achieve the sustainable restoration necessary for the 10 Year Renewable Warranty. 
ASTEC #2000 Finish The first finish layer bonds with the base sealer and melds into the old EPDM roofing material forming a new, seamless, weather tight roofing surface. Once the second layer of Re-Ply #2000 Finish cures, the new roof takes on the sustainable ASTEC advantages that permit the ICC water tight renewable warranty to be updated every ten years.